Specification of Messages, warnings & errors (Special Table)
Messages, warnings and errors found during processing of a design function are stored in the NOTICES table.
•Messages give some information on the iteration process, but are of no importance for the end results! As messages usually are not relevant when reporting results, it is advisable to remove the messages from the table prior to exporting/printing the table. This can be done by closing and re-opening the project.
•Several Warnings can be present due to the fact that a warning may be ignored by the designer and processing may continue. Warnings belonging to a design function already processed can only be removed from the NOTICES table by setting back the function in question.
•Per design function one or more errors can be present in the table. These are stored in the NOTICES table. If a non-recoverable error has been found, function processing is stopped (see status bar for the different warnings-icons giving an indication of the content of the NOTICES table). The errors are removed from the table in case the function is reset.
•When after the identification an icon is present there is a direct link to the Help file by clicking on it.
Warnings and errors are stored in the project file and can also be read after re-opening the project, messages are lost once the project is closed.
All function errors/warnings/messages are described under the "Design Functions". Each design function has its own Function error description. Errors/warnings/messages with a number (after the /) higher or equal to 80 are described under "General Errors/Warnings/Messages"
H000972, last changed: 12/6/2019