Specification of length of run and branch of tees (Input Table)

Data description/conditions:

TEE-REF:

Reference name of tee connection

Required / Must be unique

Other tee parameters such as the type, material and cross-sectional data have to be specified in table TEESPEC.

(See also DATA DESCRIPTION of table CONNECT.)

L-RUN:

Half length of run of tee

> 0 1

(The length to be specified is the length running from the intersection point of run and branch to the end points of the run. So the run of the Tee consists of 2 elements each with length L-RUN.)

L-BRN:

Length of branch of tee

> 0 1

(The length to be specified is the length running from the intersection point of run and branch to the end point of the branch. So the branch of the Tee consists of 1 element with length L-BRN.)

CYCLES:

Number of design displacement cycles

> 0

(If the number of cycles exceeds 200, other radius and thickness limits and/or stress intensification factors may apply.)

 

¹ Schematic of tee

TeeSchematic


H200171 (last modified: December 13, 2019)

See also:

Table description

Table error description