Data description/conditions
Contents
Specification of material and cross-sectional data of tees (Input Table)
Data description/conditions:
TEE-REF:
Reference name of tee connection
Required / Must be unique and correspond with TEE-REF defined in table TEECONF
TYPE:
Type of tee
Required / Prescribed names: Welded, Reinforced, Unreinforced, Extruded, Welded-In, Welded-On
(For definition of tee types see NEN-EN 13480-3 APPENDIX H. Available are: welded tee, reinforced fabricated tee with pad or saddle, unreinforced fabricated tee, extruded welding tee, welded-in contour insert tee and branch welded-on fitting tee.)
MATREF:
Material reference of tee
Must occur in lists specified in tables ISTROP and / or ANTROP, may be left blank
(If left blank, the material is taken as specified in table MATL)
MATBRN:
Material reference for branch of tee
Must occur in lists specified in tables ISTROP and / or ANTROP, may be left blank
(If left blank, the material is taken as specified in MATREF. If this in turn is also blank, the material is taken from table MATL.)
D-RUN:
Outside diameter of run
> 0. / Undefined 1
(If left blank, the diameter is taken from table DIAM.)
T-RUN:
Wall thickness of run
> 0. / Undefined 1
(If left blank, the wall thickness is taken from table WALL.)
D-BRN:
Outside diameter of branch
> 0. / ≤ D-RUN / Undefined 1
(If left blank, the diameter is taken from table DIAM.)
T-BRN:
Wall thickness of branch
> 0. / Undefined 1
(If left blank, the wall thickness is taken from table WALL.)
TE:
Thickness of pad or saddle
> 0. in case of Reinforced type, otherwise blank
R0
Radius of curvature of external contoured portion of outlet
> 0. in case of Welded, Extruded or Welded-In type, otherwise blank
CON:
State of transition of the weld for Reinforced, Unreinforced and Welded-On tees
Prescribed name Smoothed (smooth concave contour) or blank (not smooth)
¹ Schematic of tee
H310171 (last modified: December 13, 2019)
See also: