List of generated pipe dimension data based on elements list (Output Table)

Data description/Result options:

ELEM:

Number of element(n)

DOUT:

Outer pipe diameter at element(n)

T-NOM:

Nominal pipe wall-thickness at element(n)

T:

Nominal pipe wall-thickness minus corrosion allowance at elem (n)

(T is wall-thickness applied in pipeline 'beam' and nearly all stress calculations, including SHOOP in the ASME B31.8 option.)

T-MIN:

Minimum wall-thickness at element (n)

(T-MIN is nominal pipe wall-thickness minus fabrication tolerance and corrosion allowance. T-MIN is applied in the calculation of the hoop stress SHOOP (GENERAL and BELGIAN LAW options) and Sp (NEN3650))

D/T:

Outer diameter/'beam'-wall thickness ratio at element(n)

L/D:

Element length/outer diameter ratio at element(n)

RADIUS:

Bend radius at element(n)

BENDPAR:

Bend parameter at element(n)

(The value of BENDPAR should not be less than 0.2 (see table description) The value of BENDPAR is undefined if ELEM is not a BEND element)

DEADW:

Effective deadweight of pipe

(Deadweight should include weight of possible coatings, pipe contents and buoyant forces if pipe is immersed.)

The number of rows is the number of elements.

H310521, last changed: 2007-07-30

See also: