Specification of loading combination to be taken into account in pipeline calculations (Input Table)

Data description/conditions:

IDENT:

Name for loading combination

None / Required

GLOADF:

General load factor applicable to all load components

> 0.

[Default: 1.]

PRESS-F:

Specific load factor for 'PRESS' load component

[Default: 1.15]

T-DIF-F:

Specific load factor for 'TEMP' load component

[Default: 1.10]

DEADW-F:

Specific load factor for 'DEADW' load component

[Default: 1.10]

SETL-F:

Specific load factor for 'SETX/y/z' and 'SUBSIDE' load components

[Default: 1.10]

NODAL-F:

Specific load factor for 'NODALL' load component

[Default: 1.10]

ELBND-F:

Specific load factor for elastic bends

[Default: 1.10]

(If 0., bends are assumed to be non-elastic even when specified as elastic in table POLYDIF. If > 0., elastic bends must have been specified in table POLYDIF, moreover, a geometrically non-linear module (N or L) must be present and the pipeline behaviour analysis must be geometrically non-linear (GEO-NLN), if not, a function error will occur.)

WAVC-F:

Specific load factor for 'WAVE' load component

[Default: 1.20]

 

Info For all (specific) component load factors:

Condition:        ≥ 0. at least 1 component load factor must be non-zero.

Info:                If a component load factor is > 0., a corresponding non-zero load component must have been specified in the previous function.

Max/Min:        1/1 rows

 


 

H500111, last changed: 2007-07-30

See also:

Table description

Table error description