List of maximum stresses over circumference due to lateral loadings on the cross-sectional ring (Output Table)

Table description:

The output data table RSTRMAX provides a list of maximum stresses over the circumference of the cross-sections where calculations have been performed.

The stresses collected in this table are the result of the behaviour of the ring-shaped cross-section under the combined action of the lateral soil loadings and the internal overpressure in the pipe.

The stresses provided are the absolute maximum values over the 48 points over the circumference of the cross-section together with the sign of that extreme value.

Detailed stress data of the last data line of the table are contained in the additional output table RSTRESS.

The table acts in an accumulative way if the unlock option is used.

Each time Design Function 6.2 is restarted, the result data are added for the cross-sections specified in table SECTION with basic data not contained yet in CSGEN/CSLOAD/CSWEIGH. However, if Design Function 6.2 is set back, all data in table RSTRMAX are destroyed and the table gets the EMPTY status.

The loadcase name as well as a possible phase number and indication of ovalisation redistribution is shown in the table heading.

For explanation of the abbreviations in the stress-component mnemonics see output table PSTRMAX.


H620532, last changed: 2009-01-15

See also:

Data description/conditions

Table error description

Design Function 6.2 (General, Material Linear)