Detailed check stresses in element (material non-linear analysis) (Output Table)

Data description/Result options:

ANGLE:

Location at circumference where calculations have been performed

(Measured in positive sense around x-axis from y-axis.)

sX-E:

Detailed (elastic) stress over wall thickness in axial direction

sF-E:

Detailed (elastic) stress over wall thickness in circumferential direction

tZ-E:

Detailed (elastic) shear stress over wall thickness

s12max-E:

Detailed (elastic) maximum principal stress over wall thickness (blank if no tensile stress)

s12min-E:

Detailed (elastic) minimum principal stress over wall thickness (blank if no compressive stress)

tmax-E:

Detailed (elastic) principal shear stress over wall thickness

sEq-E:

Detailed (elastic) equivalent stress over wall thickness

sHOOP:

Detailed circumferential normal stress due to internal overpressure

(The hoop stress is calculated taking into account the outer pipe diameter D, the minimum wall thickness T-min and the load factor.)

 

Info The number of rows is 144 (each 2.5 degrees)

 


 

H622401, last changed: 2007-07-30

See also:

Table description

Table error description