Maximum check stresses per element (material non-linear analysis) (Output Table)

Data description/Result options:

ELEM:

Number of element where stress calculations have been performed at mid cross-section

sX-E-M:

Maximum (elastic) stress over wall thickness in axial direction ¹

sF-E-M:

Maximum (elastic) stress over wall thickness in circumferential direction ¹

tZ-E-M:

Maximum (elastic) shear stress over wall thickness ¹

s12max-E-M:

Maximum (elastic) principal stress over wall thickness ¹

(Blank if no tensile stress)

s12min-E-M:

Minimum (elastic) principal stress over wall thickness ¹

(Blank if no compressive stress)

tmax-E-M:

Maximum (elastic) principal shear stress over wall thickness ¹

sEq-E-M:

Maximum (elastic) equivalent stress over wall thickness ¹

sHOOP-M:

Maximum circumferential normal stress due to internal overpressure ¹

(The hoop stress is calculated taking into account the outer pipe diameter D, the minimum wall thickness T-min and the load factor.)

 

¹ absolute (signed) maximum over circumference

Info The number of rows is the number of specified cross sections (accumulated).

 


 

H622621, last changed: 2007-07-30

See also:

Table description

Table error description