Overview list of general cross-sectional data for stress/strain calculations (Output Table)

Data description/Result options:

ELEM:

Number of element where stress/strain calculations are to be performed at the mid cross-section

RADIUS:

Specified radius of bend at element

(Blank if element is a straight pipe element)

DOUT:

Specified outer diameter of pipe at element

WALL:

Specified wall thickness of pipe at element

LAMBDA:

Specified horizontal soil support ratio at element ¹

ANGOCC:

Calculated soil support angle at element due to loads SOILNB and/or TOPLOAD ¹

SH-ALLOW:

Calculated allowable hoop stress in element

(Allowable value according to ASME B31.8)

SLr-ALLOW:

Calculated allowable longitudinal stress in element for restrained condition ²

(Allowable value according to ASME B31.8)

SLu-ALLOW:

Calculated allowable longitudinal stress in element for unrestrained condition ³

(Allowable value according to ASME B31.8)

SC-ALLOW:

Calculated allowable combined stress in element

(Allowable value according to ASME B31.8)

SF-ALLOW:

Calculated allowable circumferential stress in element

(Allowable value according to ASME B31.8)

LOADTYPE:

Loading type for element

(Loading type according to ASME B31.8)

AXDISP:

Axial restraint condition for element

 

Info The number of rows is the number of specified cross-sections (accumulated).

¹ :Undefined if there is no soil

² Undefined if AXDISP = Unrestrained

³ Undefined if AXDISP = Restrained

 


 

H640501, last changed: 2009-01-15

See also:

Table description

Table error description