Maximum stresses over the circumference and checks according to ASME B31.8 (Output Table)

Data description/Result options:

ELEM:

Number of element where stress calculations have been performed at mid cross-section

SHOOP-M:

Maximum of circumferential normal stresses of the cross-section due to internal overpressure

(The hoop stress is calculated taking into account the outer pipe diameter D and the nominal wall-thickness T.)

SLrestr-M:

Maximum of longitudinal stresses over the circumference of the cross-section (restrained condition) ¹, ²

SLunr-M:

Maximum of longitudinal stresses over the circumference of the cross-section (unrestrained condition) ¹, ²

SCOMB-M:

Maximum of combined stresses over the circumference of the cross-section ¹

SFHT-M:

Maximum of circumferential stresses over the circumference of the cross-section ¹

SH/SH-A:

Maximum of circumferential normal stresses over the circumference of the cross-section due to internal overpressure divided by the allowable hoop stress

SLr/SLr-A:

Maximum of longitudinal normal stresses over the circumference of the cross-section divided by the allowable longitudinal stress (restrained condition) ²

SLu/SLu-A:

Maximum of longitudinal normal stresses over the circumference of the cross-section divided by the allowable longitudinal stress (unrestrained condition) ²

SC/SC-A:

Maximum of combined stresses over the circumference of the cross-section divided by the allowable combined stress

SF/SF-A:

Maximum of circumferential normal stresses over the circumference of the cross-section divided by the allowable circumferential stress

 

Info The number of rows is the number of specified cross-sections (accumulated).


¹ Both stresses at inner and outer wall face are considered.


² For each element only one condition applies: restrained or unrestrained.

 


 

H650511, last changed: 2009-01-19

See also:

Table description

Table error description